신문

Publications

2022 Publications

51
In situ modeling methodologies in building operation: A review, Building and Environment (under review)
50
In-situ observation and calibration in building operation: Comparison of intrusive and nonintrusive approaches, Automation in Construction (under review)
49
Energy signature-based clustering using open data sources to analyze urban building energy patterns: A case study on electricity change under COVID-19, Sustainable Cities and Society (under review)
48
Predicting airtightness using differential pressure in actual climate conditions: Theory and implementation, Indoor and Built Environment (under review)
47
Improvement for energy efficiency and control characteristics in VAV system using insitu sensor calibration method based on autoencoder, Energy and Buildings (under review)
46
HOS-SAX cluster analysis for building energy, operation, and efficiency, Energy (under review)
45
In-situ observation virtual sensors in building systems, Building and Environment (under review)
44
In-situ sensor virtualization and calibration in building systems, Applied Energy (Accepted)
43
Virtual Sensing in Intelligent Building Systems: Review, Challenges, and Suggestions for Future Directions, Automation in Construction (under review)
42
Y. Hong, S. Yoon, Holistic Operational Signatures for an energy-efficient district heating substation in buildings, Energy. 250 (2022) 123798. https://doi.org/10.1016/j.energy.2022.123798.
41
T. Lee, S. Yoon, K. Won, Delta-T-based operational signatures for operation pattern and fault diagnosis of building energy systems, Energy and Buildings. 257 (2022). https://doi.org/10.1016/j.enbuild.2021.111769.
40
J. Koo, S. Yoon, J. Kim, Virtual In Situ Calibration for Operational Backup Virtual Sensors in Building Energy Systems, Energies (Basel). 15 (2022). https://doi.org/10.3390/en15041394.
39
J. Bak, J. Koo, S. Yoon, H. Lim, Thermal Draft Load Coefficient for Heating Load Differences Caused by Stack-Driven Infiltration by Floor in Multifamily High-Rise Buildings, Energies (Basel). 15 (2022). https://doi.org/10.3390/en15041386.
38
T. Zhao, J. Li, P. Wang, S. Yoon, J. Wang, Improvement of virtual in-situ calibration in air handling unit using data preprocessing based on Gaussian mixture model, Energy and Buildings. 256 (2022). https://doi.org/10.1016/j.enbuild.2021.111735.
37
J. Wang, Z. Huang, Z. Liu, C. Yue, P. Wang, S. Yoon, In-situ sensor correction method for data center cooling systems using Bayesian Inference coupling with autoencoder, Sustainable Cities and Society. 76 (2022). https://doi.org/10.1016/j.scs.2021.103514.
36
S. Yoon, Y. Yu, H. Li, Y. Choi, Y. Hong, Improved energy balance calculation of unitary air conditioners via virtual in-situ calibration, Journal of Building Engineering. 45 (2022). https://doi.org/10.1016/j.jobe.2021.103464.
35
J. Li, P. Wang, T. Zhao, S. Yoon, J. Wang, The effects of multidimensional data clustering on the accuracy of virtual in-situ calibration in the photovoltaic/Thermal heat pump system, Journal of Building Engineering. 45 (2022). https://doi.org/10.1016/j.jobe.2021.103500.

2021 Publications

34
J. Bak, S. Yoon, Dwelling infiltration and heating energy demand in multifamily high-rise and low-energy buildings in Korea, Renewable and Sustainable Energy Reviews. 148 (2021). https://doi.org/10.1016/j.rser.2021.111284.
33
Y. Choi, S. Yoon, Autoencoder-driven fault detection and diagnosis in building automation systems: Residual-based and latent space-based approaches, Building and Environment. 203 (2021). https://doi.org/10.1016/j.buildenv.2021.108066.
32
Y. Hong, S. Yoon, Y.S. Kim, H. Jang, System-level virtual sensing method in building energy systems using autoencoder: Under the limited sensors and operational datasets, Applied Energy. 301 (2021). https://doi.org/10.1016/j.apenergy.2021.117458.
31
Z. Liu, Z. Huang, J. Wang, C. Yue, S. Yoon, A novel fault diagnosis and self-calibration method for air-handling units using Bayesian Inference and virtual sensing, Energy and Buildings. 250 (2021). https://doi.org/10.1016/j.enbuild.2021.111293.
30
J. Kim, S. Yoon, J. Koo, J. Bak, Y.S. Kim, TDC-based horizontal leakage area estimation in multiunit residential buildings: Three correction factors, Building and Environment. 192 (2021). https://doi.org/10.1016/j.buildenv.2021.107630.
29
Y. Choi, D. Song, S. Yoon, J. Koo, Comparison of factorial and latin hypercube sampling designs for meta-models of building heating and cooling loads, Energies (Basel). 14 (2021). https://doi.org/10.3390/en14020512.
28
R. Kim, Y. Hong, Y. Choi, S. Yoon, System-level fouling detection of district heating substations using virtual-sensor-assisted building automation system, Energy. 227 (2021). https://doi.org/10.1016/j.energy.2021.120515.
27
P. Wang, K. Han, R. Liang, L. MA, S. Yoon, The virtual in-situ calibration of various physical sensors in air handling units, Science and Technology for the Built Environment. 27 (2021) 691–713. https://doi.org/10.1080/23744731.2020.1798175.

2020 Publications

26
S. Yoon, D. Song, J. Kim, J. Kim, H. Lim, J. Koo, Identifying stack-driven indoor environmental problems and associated pressure difference in high-rise residential buildings: Airflow noise and draft, Building and Environment. 168 (2020). https://doi.org/10.1016/j.buildenv.2019.106483.
25
H. Lim, J. Seo, D. Song, S. Yoon, J. Kim, Interaction analysis of countermeasures for the stack effect in a high-rise office building, Building and Environment. 168 (2020). https://doi.org/10.1016/j.buildenv.2019.106530.
24
S. Yoon, In-situ sensor calibration in an operational air-handling unit coupling autoencoder and Bayesian inference, Energy and Buildings. 221 (2020). https://doi.org/10.1016/j.enbuild.2020.110026.
23
P. Wang, J. Li, S. Yoon, T. Zhao, Y. Yu, The detection and correction of various faulty sensors in a photovoltaic thermal heat pump system, Applied Thermal Engineering. 175 (2020). https://doi.org/10.1016/j.applthermaleng.2020.115347.
22
Y. Choi, S. Yoon, Virtual sensor-assisted in situ sensor calibration in operational HVAC systems, Building and Environment. 181 (2020). https://doi.org/10.1016/j.buildenv.2020.107079.
21
J. Bak, S. Yoon, D. Song, H. Lim, Y.S. Kim, Weather-driven infiltration and interzonal airflow in a multifamily high-rise building: Dwelling infiltration distribution, Building and Environment. 181 (2020). https://doi.org/10.1016/j.buildenv.2020.107098.
20
P. Wang, J. Li, S. Yoon, T. Zhao, Y. Yu, The detection and correction of various faulty sensors in a photovoltaic thermal heat pump system, Applied Thermal Engineering. 175 (2020). https://doi.org/10.1016/j.applthermaleng.2020.115347.
19
J. Li, T. Zhao, P. Wang, S. Yoon, Y. Yu, Effects of various partitions on the accuracy of virtual in-situ calibration in building energy systems, Journal of Building Engineering. 32 (2020). https://doi.org/10.1016/j.jobe.2020.101538.
18
S. Yoon, Y. Choi, J. Koo, Y. Hong, R. Kim, J. Kim, Virtual sensors for estimating district heating energy consumption under sensor absences in a residential building, Energies (Basel). 13 (2020). https://doi.org/10.3390/en13226013.

2019 Publications

17
S. Yoon, Y. Yu, J. Wang, P. Wang, Impacts of HVACR temperature sensor offsets on building energy performance and occupant thermal comfort, Building Simulation. 12 (2019) 259–271. https://doi.org/10.1007/s12273-018-0475-3.
16
P. Wang, S. Yoon, Y. Yu, Z. Shen, Experimental study on the active enhancement mechanisms of heat and mass transfer in an absorption chiller (RP-1462), Science and Technology for the Built Environment. 25 (2019) 58–68. https://doi.org/10.1080/23744731.2018.1498668.
15
J. Wang, Q. Zhang, S. Yoon, Y. Yu, Impact of uncertainties on the supervisory control performance of a hybrid cooling system in data center, Building and Environment. 148 (2019) 361–371. https://doi.org/10.1016/j.buildenv.2018.11.026.
14
J. Wang, Q. Zhang, S. Yoon, Y. Yu, Reliability and availability analysis of a hybrid cooling system with water-side economizer in data center, Building and Environment. 148 (2019) 405–416. https://doi.org/10.1016/j.buildenv.2018.11.021.
13
S. Yoon, D. Song, J. Kim, H. Lim, Stack-driven infiltration and heating load differences by floor in high-rise residential buildings, Building and Environment. 157 (2019) 366–379. https://doi.org/10.1016/j.buildenv.2019.05.006.
12
D. Song, S. Yoon, C. Jeong, J. Kim, H. Lim, Heat, vapor, and CO2 transportation caused by airflow in high-rise residential buildings, Building and Environment. 160 (2019). https://doi.org/10.1016/j.buildenv.2019.106176.
11
P. Wang, S. Yoon, J. Wang, Y. Yu, Automated reviving calibration strategy for virtual in-situ sensor calibration in building energy systems: Sensitivity coefficient optimization, Energy and Buildings. 198 (2019) 291–304. https://doi.org/10.1016/j.enbuild.2019.06.014.

~2018 Publications

10
J. Wang, Q. Zhang, Y. Yu, X. Chen, S. Yoon, Application of model-based control strategy to hybrid free cooling system with latent heat thermal energy storage for TBSs, Energy and Buildings. 167 (2018) 89–105. https://doi.org/10.1016/j.enbuild.2018.02.036.
9
Y. Wang, P. Wang, S. Yoon, Y. Yu, M. Bai, Characteristics of flow and heat transfer of nanofluids under laminar states, Numerical Heat Transfer; Part A: Applications. 73 (2018) 1–16. https://doi.org/10.1080/10407782.2017.1420298.
8
P. Wang, K. Han, S. Yoon, Y. Yu, M. Liu, The gas-liquid two-phase flow in reciprocating enclosure with piston cooling gallery application, International Journal of Thermal Sciences. 129 (2018) 73–82. https://doi.org/10.1016/j.ijthermalsci.2018.02.028.
7
S. Yoon, Y. Yu, Strategies for virtual in-situ sensor calibration in building energy systems, Energy and Buildings. 172 (2018) 22–34. https://doi.org/10.1016/j.enbuild.2018.04.043.
6
S. Yoon, Y. Yu, Hidden factors and handling strategy for accuracy of virtual in-situ sensor calibration in building energy systems: Sensitivity effect and reviving calibration, Energy and Buildings. 170 (2018) 217–228. https://doi.org/10.1016/j.enbuild.2018.04.017.
5
S. Yoon, Y. Yu, Hidden factors and handling strategies on virtual in-situ sensor calibration in building energy systems: Prior information and cancellation effect, Applied Energy. 212 (2018) 1069–1082. https://doi.org/10.1016/j.apenergy.2017.12.077.
4
S. Yoon, Y. Yu, A quantitative comparison of statistical and deterministic methods on virtual in-situ calibration in building systems, Building and Environment. 115 (2017) 54–66. https://doi.org/10.1016/j.buildenv.2017.01.013.
3
S. Yoon, Y. Yu, Extended virtual in-situ calibration method in building systems using Bayesian inference, Automation in Construction. 73 (2017) 20–30. https://doi.org/10.1016/j.autcon.2016.10.008.
2
W. Cho, D. Song, S. Hwang, S. Yun, Energy-efficient ventilation with air-cleaning mode and demand control in a multi-residential building, Energy and Buildings. 90 (2015) 6–14. https://doi.org/10.1016/j.enbuild.2015.01.002.
1
S. Yoon, J. Seo, W. Cho, D. Song, A calibration method for whole-building airflow simulation in high-rise residential buildings, Building and Environment. 85 (2015) 253–262. https://doi.org/10.1016/j.buildenv.2014.12.004.